So, if you can desolder skillfully, then that may save you some headaches to just pull the chip and work with it directly. Rare cases you may need to remove chip from board. If you continue to have software issues, use flashrom (it’s 100% compatible with MX25L1605, if that is the actual chip)īut, so should be 1.18, 1.30, v1.31(1.4) (CH341AFree), colibri, ASProgrammer (all those should also be certainly compatible)īut, if you can’t detect and ID, then clip/connection is not correct, or power not correct (batttery, PSU cables, or lack of is needed) Looks like it was ready and waiting on you in Colibri first image, 0x9C = "Ready, waiting on user input/next function" If you cannot read or ID chip, no point in trying to write! If you have some pin on programmer clip disabled via tube like you have in the guide, stop that Plug in main battery and try to read, then if nothing, add power cable, then if nothing, reclamp 10 times on each one of those ways again trying again each time, you will get it (you know the drill ) This is almost certainly not 1.8v chip, it’s too old/small BIOS, so no adapter needed Please link me to the stock BIOS download page for this model, thanks It may also help to take more images, from different angles, with and without flash, then look them all overĪlso, you can smear some white thermal paste over top, then wipe off, it may fill in the letters so you can read easier. Read the ID off the chip with your eyes, flashlight, and a magnifying glass.
0 kommentar(er)
